• What Program Can I Use For My Power Mac G4

The updates are available on the Apple Web Site or of course on the Kitchen Sink CD. Follow the directions.

They regularly update the definitions so your Mac can kill the PC virus attachments. There is no better virus software in my book and the price is right. If you call with an OSX related question please do us the courtesy of dialing on your dime. Please use the 1-405-601-5301 number. We can provide you options and software for your installation if you do have trouble.

The early 400 MHz (later 350 MHz) -based version used a identical to the one used in computers including the use of Zero Insertion Force (ZIF) processors sockets (minus the port), in a 'graphite' colored case and with the new 7400 (G4) CPU. The higher-speed models, code name 'Sawtooth', used a greatly modified motherboard design with 2x graphics (replacing the 66 MHz PCI slot). The PCI variant was discontinued at the end of 1999. The machines featured drives as standard. The 400 MHz and 450 MHz versions had 100 as standard equipment, and as an option on the 350 MHz Sawtooth.

All large orders have to be signed for. Klein OKC, OK 73139.

Some folks think that everything should have it turned on but it costs speed. If you use your data drive for video project work for example it slows down the drive access enough it may cause you problems. Burning large amounts of data to an optical may be slowed down enough you may have a failure is another reason you may want to turn it off. Since the drive utility makes it easy to turn on an off you may want to use this to your advantage. Turn it off when you need max performance and on the rest of the time for safety. MAKING INCREMENTAL BACKUPS OF OSX For my servers I use a small program called. It has a decent and fairly uncomplicated interface.

I can not install 10.5.6 (although I own this program), because I want to continue working with my SCSI-gear (scanners & flasher) > All Mac-software above 10.2.8 makes it virtually impossible to use SCSI-PCI-Cards (mine are ADAPTEC 2906's).

We can provide you options and software for your installation if you do have trouble. Give us a call! OSX Install Notes for G4 Systems Updated 4-1-2013 Make sure you absolutely and solidly have a backup of all data before starting.

Here is how I install OSX on G4 Systems There are problems with the OSX when installing on some systems. Based on my experience: • NEW NOTE: OSX ABSOLUTELY SHOULD be installed in the FIRST PARTITION of the FIRST drive if you didn't know. I don't usually partition drives on G4's but if you must, make sure it is about 12GB's or so. In a pinch you can boot from a slave or even external Firewire Drive but for day to day operations FOLLOW THE RULES. You may get by running X from another partition but it will eventually bite you. I usually also install and run classic mode in the first partition as well.

Alternative Uses For Your PPC Mac We’ve established that it’s perfectly possible to use an old PowerPC as a regular computer, but is it ideal? Not really – these machines are probably quite slow to anyone used to modern devices. Don’t panic: there are other uses for this hardware. Here’s a quick list: As Your Own Alternative To Cloud Apps We taught you about, which is a The NSA and PRISM scares demonstrated that governments can and will access the various popular online cloud services. This means that now is one of the best times to consider creating your own cloud solution. Well, as it turns out, this software is easy to install on a PPC Mac running Linux: just check out your distro’s package manager. Set up the server on you old PPC, then install the client on your other computers – Windows, Linux or Mac.

So when the day came that I was able to my hands on a 1.25Ghz MMD G4 I was overjoyed. First thing I did when I got it home was pop in the hard drive from the eMac I tossed out. Plugged it in and wha-la! Was like I never got rid of the old beast. I had a box of computer parts laying around and quickly found and maxed the 2GB of ram, added two more hard drives in raid-0 and added an 80mm fan to the pci vents to draw out more heat. Then of course I added 10.5 to complete the build.

Obviously the program association with the SMI extension is incorrect. Not sure where to change that association. Holding down C during boot will not launch the Tiger DVD, but it will work with the OS 9 Install DVDs.

Including all updates takes several hours to complete an install with all updates. • Should your install initially fail I have learned that reducing the ram in the unit helps. Don't ask me why but one stick in the first slot profiler reads seems to result in things working where they didn't before. If things go well you should be able to boot in X now. SETUP TWO ACCOUNTS to start with and don't forget the passwords.

The version of Ubuntu, which is community-supported rather than officially supported, should run on your Mac that has a. There are some differences between the PowerPC version of Ubuntu and the versions of Ubuntu for officially supported architectures; you will likely find the helpful. There are also some.

He has been looking to upgrade to a 13″ Macbook Pro but I told him to hold off when the most recent model came out with Core2Duo CPUs. I strongly suspect that if you max out the RAM on your desktop it will run just fine with two 1.42GHz CPUs.

The 1999 models were in two families. At the low end, the 'Power Mac G4 (PCI Graphics)' 400 MHz model actually shared the logic board from the G3. It ran for just $1,599 and came with a 10 GB hard drive, 64 MB of RAM, and a CD-ROM drive. The high-end 500 MHz 'Power Mac G4 (AGP Graphics)' came with an all-new logic board design and included AGP-based graphics, AirPort compatibility, a faster memory bus, DVD-ROM or RAM standard, an internal FireWire port, two separate USB buses and support for up to 1.5 GB of RAM.

Wes Using an old Mac tower to it’s fullest is a great experience. I’ve unfortunately always had all-in-ones.

The contains links to where you can download the PowerPC version for each Ubuntu release, as well as links to special installation instructions, as applicable. Please note that for some Ubuntu releases, the PowerPC version's desktop.iso image is too large to be burned to a CD, so it must be burned to a DVD instead (or written to a USB flash drive, if your G4 Mac is capable of booting from one).

What Program Can I Use For My Power Mac G4

Don't plunk down your hard earned money on a new Mac when an upgraded Mac can run faster than a new Mac. We have the best upgrades and support for Macs: The easiest and most cost effective way to get the most from your Mac. Open and create more at one time with less slowdowns. SSDs are up the 91 times faster than a hard drive.

Updated Quicksilver machines, officially named Power Mac G4 (QuickSilver 2002), were introduced on January 28, 2002 with 800 MHz, 933 MHz and dual 1 GHz configurations. This was the first Mac to reach 1 GHz.

Yah, you can upgrade just about everything, but do be sure how much money you want to put into it - they're only worth a few hundred now. RAM is pretty easy to find - it's standard PC 133 RAM for most G4 models. I recommend Other World Computing for RAM, as I've purchased a bunch of their ram - fast, reliable, and well priced!

A single processor 1.25 GHz model would be the last Power Mac G4 the company offered to the public after the announcement of the new Power Mac G5, introduced in June 2003. The last real update to the Power Mac G4 line was on January 28, 2003 offering dual 1.42 GHz PowerPC 7455 processors, with features not seen in previous DDR models: built-in FireWire 800 connector, optional integrated, and optional integrated. These were also the first Power Macs that could not boot into. With the launch of the on June 23, 2003, Apple re-introduced the August 2002 Power Mac G4 because of perceived demand for Mac OS 9 machines. Between that, its low price-tag, and the delayed availability of Power Mac G5s, it proved a strong seller for a relatively short time. Production stopped on June 27, 2004 and the remaining inventory was liquidated, ending the 20-year legacy of Classic Mac OS support with its discontinuation.

I've tried two of these drives and have experienced the same problem with each. After boot up when I have the 320 drive in the system as a slave (cable select in the second connector) the system will hang after anywhere from a couple of minutes to 15-20 minutes. I've been trying to clone the 80 Gig to the 320 and I've tried SuperDuper and CCC but neither will complete before the system hangs. I can even boot the system up and let it sit and it'll eventually hang.

I still prefer the older version but the new version 3 does have nice features although it only works in Tiger or above. If you don't have an internal second drive consider purchasing one. Having a bootable backup of your X install on a second drive is really a good idea. We will talk you through the install if you need help. My OSX JUST SITS THERE SPINNING THE BEACHBALL AND NEVER FINISHED BOOTING? Or maybe you get the Kernal Panic Screen (charcoal gray panel with printing). Media player for mac os. ANYTIME YOU ARE HAVING TROUBLE BOOTING UNPLUG EVERYTHING FROM THE BACK OF YOUR COMPUTER except the keyboard and monitor, and of course the power plug.

If it fails to install again, format the hard drive by having it write 0's or replace the drive. NOTE FROM RICK (a Headgap Customer): Bob - thanks for your time on the phone today. Switching from a LCD to a CRT revealed the problem. To recap: It's a BW G3, rev2 main board, boot ROM v 1.1.1f4, plenty of RAM and HD space.

The Power Mac G4 offers a lot of power, expandability (3-4 PCI slots and several drive bays), and upgradability (1.5 to 2.0 GB maximum RAM) with prices starting as low as $60. Declining Value G4 Power Macs aren’t the great values they once were as the selection available through online dealers has declined significantly and prices have started to rise on the most powerful models.

Ground shipping may add $35 or more. • none listed at present 30 day warranty. OS X 10.4 Tiger installed.

5 and 12 into a 28v pin position. • The author gives pinout numbers for all the rewiring of a psu harness, but neglects to outright SAY to go ATX pinout 9 (5v) to Mac pinin 22. So how would one replace a failing G4 PSU with a standard?

(not on 9.2.2? Upgrade your classic OS first). Make sure your is updated! • Run disk first aid or Norton (OS9 only systems) for the last time. (Do not install if you can't get a clean bill of health).

We will talk you through the install if you need help. My OSX JUST SITS THERE SPINNING THE BEACHBALL AND NEVER FINISHED BOOTING? Or maybe you get the Kernal Panic Screen (charcoal gray panel with printing). ANYTIME YOU ARE HAVING TROUBLE BOOTING UNPLUG EVERYTHING FROM THE BACK OF YOUR COMPUTER except the keyboard and monitor, and of course the power plug.

• Should your install initially fail I have learned that reducing the ram in the unit helps. Don't ask me why but one stick in the first slot profiler reads seems to result in things working where they didn't before. If things go well you should be able to boot in X now. SETUP TWO ACCOUNTS to start with and don't forget the passwords.

The G4 AGP has 4 RAM slots located to the left of the Processor, the chips do not have to be installed in pairs or matched so you can add as you go. Under the later OSs (Mac OS 10.3 or later) the AGP G4 can support up to 2GB of RAM, achieved through 4 512MB chips. Under earlier Operating Systems it will only address 1.5GB of RAM using 2 512MB chips and 2 256Mb chips. The Mac Mantra is 'You can never have enough Memory' and this is particularly true with the Mac OS 10 and image editing applications, such as Photoshop. The rule of thumb for Photoshop is that you need between 3-5 times the size of the file you are working on in free unused RAM. When you consider that Mac OS 10 really likes at least 256MB to itself, if you were working on a 30MB image in Photoshop on 10.4 and had no other applications running you'd need a minimum of 346MB RAM!

( is a fantastic reference for this!). PC cards are far cheaper, although still a bit expensive. Keep an eye out for sales and at used computer stores - I found a Radeon 9800 Pro for $15 once, and pulled another out of an old Dell desktop that had been thrown out. Note that the QS G4s use an AGP 4x bus, and that due to Apple's special ADC monitor port, you'll need to tape over pins 3 and 11 on any PC card you add. See the link for more info. I believe you can swap CPUs with other QS models, if you find one used, but you won't get faster than a dual-1Ghz. Beware that MDD G4 CPUs are NOT compatible with QS G4s!

It’s worth trying out. As Anything You Can Imagine Is an old PPC Mac the ideal computer in 2013? Is it useless?

Con My mother has been using a similar Mac for years. Her job requires a system 9 application because we haven’t found a reliable method of converting that file type to something a modern application can use. Poor thing can hardly finish a single task without getting bogged down or crashing, but it still tries. It’s got true grit, and still looks better than most PCs I’ve seen. I bet if we could do a clean install, it would be completely usable again. Unfortunately we don’t have a system 9 disk anymore. And my mother is afraid that such a big effort will just be too much for it.

The scripting is a bit daunting but you can automate your jobs. I simply just do it each evening. You simply drag your source and destination to the graphic interface and select what you want to do from the buttons. They can even be a network drive you are connected with. It is free to use but I think they take donations. You can choose to make the drive or partition you are backing up to bootable and it even handles the older OS9 files if you have them on your system.

That goes to a machine that, The Power Macintosh G4 (Mirrored Drive Doors 2003) was released on June 23, 2003, alongside the new Power Macintosh G5. It replaced the six month old Power Mac G4 (FireWire 800) that came before it. Unlike its successor, the Power Macintosh G4 (MDD 2003) lacked a G5 processor, aluminum enclosure and USB 2.0. Unlike its predecessor, the Power Macintosh G4 (MDD 2003) lacked FireWire 800, AirPort Extreme and built-in Bluetooth.

The 'Graphite' Power Mac G4 Developer Type Mini Tower Release date August 31, 1999 (19 years ago) Discontinued June 20, 2004 single or dual, 350 MHz – 1.42 GHz (Up to 2 GHz processors through 3rd-party.) Predecessor Successor The Power Mac G4 is a series of designed, manufactured, and sold by from 1999 to 2004 as part of the line. Built around the series of, the Power Mac G4 was marketed by as the first 'personal supercomputers', reaching speeds of 4 to 20. This was the first existing Macintosh product to be officially shortened as 'Mac', and is the last Mac able to boot into. The enclosure style introduced with the was retained through its entire five year production run of the Power Mac G4, albeit with significant changes to match Apple's evolving industrial design and to accommodate increasing cooling needs.

Ground shipping may add $20 to $60 to your cost. Used Macs typically come with a 90 day warranty. Memory and drive size reported as RAM/hard drive size.

Does anyone have any suggestions for me? Here are my current graphics stats: NVIDIA GeForce2 MX: Chipset Model: GeForce2 MX Type: Display Bus: AGP Slot: SLOT-1 VRAM (Total): 32 MB Vendor: nVIDIA (0x10de) Device ID: 0x0110 Revision ID: 0x00b2 ROM Revision: 1055 3) Should I upgrade to a USB 2.0 PCI card? Is this necessary? I was interested in purchasing a Firewire/USB hub and that's when I learned of the USB 2.0 thing. I don't know if I need it or not. 4) I just bought a 400GB external FW HD, but is it also recommended to buy a second internal hard drive? I'm leery of buying one because I'm not very computer HW savvy (surprise surprise!) but I'm wondering if it would be good for my computer considering its age and how much I use graphics software on my computer.

The stock 10/100 is supported as is USB and Firewire. Imedia converter for mac 2d to vr. You may have a special graphics card or other PCI cards that need updates. Check before starting and make sure you have the necessary drivers. You may have no problems and many of our customers are successfully running OSX on custom boxes purchased from us and most of our office machines have Tiger installed.

I think all Mac OSX users should do the same. While I have ran for years on my personal systems with little or no problems (OSX Tiger is indeed stable), things do happen and being prepared keeps you from going through the grief many of you do when something does happen to your system. You can then take the time to troubleshoot and repair the problem or simply replace the original install using (or send it to us). I also use a program called RSYNCX to do any periodic updates to those backups, since it only updates the files that have changed.

Following your last suggestion allowed me to upgrade the firmware! However, I still can't get it to boot from the Tiger DVD. Holding down the C key on startup just causes the system to not even boot up. If I boot into OS 9 and put the Tiger DVD in, I can see the contents. I double-click on the Install Mac OS X icon and it brings up the screen where it tell me to click on Restart to begin the installation process and then I get: 'An error occurred. Startup Disk was unable to select the install CD as the startup disk (-2)'. So I'm very happy to report that I now have Tiger running on this machine.

I store my old backup drives in my underwear drawer (sealed airtight), just in case. You may also want to start thinking about off site storage. Not too many years ago we had a break in and thieves stole some of our systems. Fortunately they left the drives in my underwear drawer alone so I was back up and running quickly albeit from dated data. I now store another copy of our important data off the premises in case of breakins, fire, tornadoes, or other disasters. It usually is a month or so old and we have started using 'thumb' drives. With sizes from 1GB up to 8GB commonly available it isn't expensive to keep a copy of your really important stuff.

Fix one thing at a time. If you just installed hardware remove it. • Try booting with the shift key held down. This is called safe mode (kind of like starting 9 with the extensions off). If it comes up okay then sometimes you can then simply reboot and things will work normally. I would load the disk utility from the Applications/Utility folder and repair permissions.

This does not make much sense, maybe he meant for the atx 5v trickle to patch into the mac 12v pin position, but his diode diagram says into the g4 TRICKLE POWER position (only thing on the mac side with the word TRICKLE in it is the 28v trickle pinin. 5 and 12 into a 28v pin position. • The author gives pinout numbers for all the rewiring of a psu harness, but neglects to outright SAY to go ATX pinout 9 (5v) to Mac pinin 22.

I really didn't get a chance to mess with it cause I had to go run an errand, so I shut it off. When I came back and turned the Mac on the screen just stayed black the Mac isn't booting I can hear the fan running and the power button light blinks but nothing else happens. I tried connecting it to a regular computer screen and same thing no booting. So I'm truly lost at what happen since it was working fine one min and the next it's not. Well I'm hoping someone in this forum might be able to help me and provide me with the information I need to get it going again (if even possible) again I'm a newbie to Mac so a step by step would be nice.